Page tree

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 61 Next »

Knowledge Base

Home page

All Products

This service will convert your handwriting into a 'true type' font that can be installed in your computer and used like a regular font. You can optionally include your signature in this process so it can be easily be inserted into any document. This font can be used in any application as long as you can install 'true type' fonts in your operating system. We can assure you that this font will work in Ms Windows, but we have not tested it in other operating systems. 

1. Print template

Print this PDF template. To make optimal use of the size of your paper, we recommend you print out the PDF document.

2. Fill out template

Use a suitable pen such as a black permanent marker of fine or medium thickness to draw the characters the way that you normally write. Make sure you draw your characters within the designated cells.
Only characters that are written down on the template are added to your font set, so if you only need a few characters, then only write those down. If you don't want accented characters, you can skip page two of the template.

(warning)  Additional charges will apply if you skip a character in the template and you want that character added later. You will also be charged extra if you request any of your characters to be modified after we've started work; such changes as size or vertical/horizontal positioning. 

All cells except the signature cell contain horizontal guidelines (little marks on both left and right side of each cell) that should help you write your characters in a consistent size and positions in each cell. First row in the image below illustrates the best results while the second row shows you what to avoid.


  • capt height: The highest point, such as top of 'A'.
  • x-height: Highest point of lower case such as 'e'.
  • baseline: Line where you write on.
  • descender: Lowest point of a character such as 'g'.

3. Scan template

Scan your completed template after you have drawn all your characters. Following are some important points to keep in mind when scanning.

  • Scan at a reasonable resolution; minimum of 300 dpi
  • You must draw your characters accurately as described in step 2 above. Additional charges will apply if you decide to modify your template after we've started work on your first supplied template.
  • Verify that the scanner bed is clean

  • Put the template pages as straight as possible on the scanner bed

  • Scan in color (24-bit) or grayscale (8-bit), not just black and white (1-bit)

  • All grid lines must be clearly visible

  • You must save your template in one of the following formats: .gif, .jpg, .jpeg, .png, .pdf, .tif, or .tiff

4. Send template

Upload your template file to your order placed online. The font name will appear as the font name in all applications, so make sure you give your font an appropriate name. You will need to include the following information in your email:

  1. Font Name (2-30 characters max)

  2. Your File must not exceed 10MB

        * Only template files with the extensions .gif, .jpg, .jpeg, .png, .pdf, .tif, and .tiff are allowed. 

Step Five (Receive and Install)

In order to use your font, you need to install it. Installing a font makes the font available to all applications (including but not limited to most word processing, spreadsheets, desktop publishing and graphic design programs like Microsoft Word, Adobe Illustrator, etc.) on your computer. The easiest and most convenient way to install your fonts is to use a font manager. If you don't have a font manager, do follow the instructions below.

Note: Some programs require a restart for the new font to be available.

Windows font installation instructions

  •  Open "Control Panel" (under Start->Settings)

  •  Double-click "Fonts" category

  •  Select "Install New Font..." from File menu

  •  Browse to the location you placed the font file

  •  Select "Your font (TrueType)" from the window

  •  Click the Ok button

Note: If you are reinstalling the font, it is recommended you uninstall and delete the font BEFORE installing the new version. Sometimes a reboot is required as well.

Macintosh font installation instructions (Mac OS X)

  •  Locate your font file in the Finder

  •  Double-click the font file icon

  •  Font Book should display the font

  •  Click the Install button

Note: In order to make use of the newly installed font, some applications require you to reboot your Mac.